C5 Corvette

Whether you are a property owner who's handy at fixing things around your house or an experienced technician who works with various types of machinery, eventually you will work with industrial motors. You can find them with various horsepower, speeds, voltage, frames, enclosures, and mountings depending on their various uses. Two of the most common engine types are AC and DC, referring to engines that utilize alternating current and direct current, respectively.

A Simple Design: This machine is made of three windings in the exterior section with a simple rotating section, called the rotor. The AC line voltage causes the rotor to rotate around the axis. Its speed is dependent on only three things: the fixed number of poles, or electromagnetic winding sets, built into the motor; variable speed drives, commonly referred to as inverters or amplifiers, that change the frequency of the AC line voltage; and the amount of force or load on the machine. Changes in speed are expected when the load changes.

An Understandable and Cost-Efficient Design: A permanent electromagnetic field is created in the stator, or stationary section, of the motor by either permanent magnets, which are common in fractional horsepower applications, or electromagnetic windings, which are used in applications that need five or more horsepower.

This site contains Ebay partner affiliate links, which may earn us a commission at no additional cost to you.

 

Thank you for visiting our site. Unfortunately, we were unable to display the search results from eBay at this time. Please click the link below to search eBay directly for listings related to C5 Corvette.

Click To See the Best Prices on C5 Corvette On eBay

 

 

Speed Control: With this type of machine, controlling the speed is simple. The higher the armature voltage, the faster the rotation, meanings that a faster speed. The voltage will increase along with the horsepower. Most DC industrial motors will perform well over a speed variety of 20:1, down to approximately 5 % to 7 % of the base speed. They are designed with variable speed operation in mind, so they have heat control features that allow lower operating speeds.

Load Control: The load, or torque, control is simple. The output torque is proportional to the current, so if you limit the current, you limit the torque it can take. This is one reason why these DC engines are used for applications such as textile manufacturing.

When you read these steps you may see some things you already know, maybe you won't know any, but in either case you will need to keep an open mind and remember that EACH TIP is in there because it has been tried and tested 100's of times and WORKS! Also remember you may be stepping out of your comfort zone, if so. good! The further you get from your comfort zone the more money you can potentially make!